Nano Tecnology

Acquamica is the best solution for: Antigraffiti, Anti Corrosion, Anti Formaldehyde, Self Cleaning

Acquamica is a permanent protective agent for painted surfaces. These are the new chemical structures that L & G presents to the Italian market. We are talking about polysilazanes or liquid glass of organic or inorganic nature, substances that can convert into silica simply because in contact with the humidity of the air. Create a coating thickness of 2 to 7 microns. Acquamica is particularly suitable for smooth, non-absorbent surfaces, such as single and two-component paints, polyurethane or epoxy paints, polyester paints, fiberglass surfaces.
Applications: Permanent protection for boats and cars, trains, buses, car and naval polishing, anti-corrosion paint and metals, statues, anti-graffiti ceramics, protective for silver, PMMA, taps, road signs, metals in general, reduces the emission of formaldehyde, but above all it is the best antigraffiti available on the Italian market. Guaranteed 5 years.

Acquamica Professional

Acquamica professional applies in many sectors. Repainting a boat, for example, requires considerable economic expenditure, a complex substrate preparation procedure and a very accurate finishing job. With Acquamica you can simplify everything, just abrade with a water-based abrasive paper, then very fine, and apply Acquamica according to our procedure. Acquamica creates a coating thickness of 4.0 microns, a contact angle of 104 ° C to water droplets, a longer life over time than all the paints available on the market. Excellent for gelcoat and fiberglass. It is also used in interiors to eliminate formaldehyde.
Drying:
The products are dry after 1 hour, (20-25 C°). Complete hardening after 1 week.
Consumption:
Do not exceed over 15 ml/m2.
It is a permanent product.

Acquamica Antigraffiti

It's the big problem to solve in cities, on public transport, on trains. Apply Acquamica on metallic, painted or plastic surfaces according to our instructions eliminates the annoying problem of writers' vandalism. The substrate becomes an easy-to-clean, enhanced weather protection, bright finish effect. The paints no longer attach themselves to the protected surface, they create drops, it is impossible to make graffiti. For cleaning, just a cloth soaked in alcohol or a light solvent. It is the best permanent anti-graffiti available on the Italian market.
Drying:
The products are dry after 1 hour, (20-25 C°). Complete hardening after 1 week.
Consumption:
Do not exceed over 15 ml/m2. All packs are 5 liters.
It is a permanent product.

Acquamica HP

Acquamica HP anti corrosion protecting a metallic surface of any kind becomes very simple with Acquamica. It is the best anticorrosive available on the market to date. A 4 micron coating is created and a layer resistant to acid and basic attacks. Tested in salt spray for 1,000 hours. Better performance if heated to 130°C for 2h. It is used on steel, stainless steel, AISI steel from 304 to 430, for the protection of through corrosion, in electronics and in lighting. The automotive sector is already using our product on electronic boards and catalytic converters.
Drying:
The products are dry after 1 hour, (20-25 C°). Complete hardening after 1 week. Max cooking temperature 90°C/2h or 180°C/1h.
Consumption:
Do not exceed over 15 ml/m2. All packs are 5l.
It is a permanent product.